Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13652612
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | The use of aluminum extruder technology and precautions |
Published: | 2015-01-31 |
Validity: | 30 |
Specifications: | Regular |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | 1, using high-density extruded aluminum die tryout teeth when the first branch of aluminum to help must be 150-200mm short rod or pure aluminum rod. 2, before the tryout, must be on the center of the aluminum extruder, extrusion axis, Sheng ingot barrel, mold base discharge port, adjusted to a straight line. 3, tryout and production process, for rod temperature should be maintained at between 480-520 ℃. 4, for the aluminum material to be heated in a conventional heating temperature, temperature controlled at about 480 ℃, a diameter of 200mm or less, and the need to maintain a temperature of not less than 2 hours, if used, are incubated split mold should be more than 3 hours; In the process of making the mold, if the diameter exceeds 200mm incubation time of 4-6 hours or more, it can guarantee the mold core portion with the outside are able to obtain a uniform heat. 5, in the test mode or in the production of the past, you must use the clear cylinder head gasket clean liner tube containing ingot and see extruder is operating properly. Automatic 6-bit http://www.jndcly.com/ aluminum manufacturer, tryout production process, the need to turn off the extruder, each switch needs to zero. From the smallest pressure slowly starting pressure, the material time in about 3-5 minutes, aluminum filling process, we want to control the pressure. Pressure is preferably controlled within 100Kg / cm2, the current control within 2-3A, in 80-120Kg / cm2 can be the material, and then it can be appropriate to accelerate, the pressure is less than the normal use 120Kg / cm2 prevail. 7, in the production process if there blocking mode, partial tooth, and so much speed deviation of the time to shut down immediately, and to point the way back unloading mode, which can effectively prevent mold scrapped. 8, in the production process to maintain the discharge port must be smooth, or clamps for tightness advance under the circumstances to be, so that you can reasonably good grasp of the material. Anomalies observed at any time, and timely processing. http://www.jndcly.com/ aluminum manufacturers aluminum coil manufacturer |
Admin>>>
You are the 7144 visitor
Copyright © GuangDong ICP No. 10089450, Jinan Decheng Aluminum Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7144 visitor
Copyright © GuangDong ICP No. 10089450, Jinan Decheng Aluminum Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility